隧道内偏置火源顶棚近壁面温度边界层效应研究

基于隧道火灾不同横向火源位置的非对称卷吸影响,通过模拟计算分析了中心火源和偏置火源产生的烟气沿纵向最大温升变化规律,研究了顶棚下方近壁面区域内的不同温度分布,提出偏置火源纵向空间最大顶棚温升公式。结果表明:在壁面黏性作用下,沿纵向蔓延的烟气最高温度在顶棚下方呈现“温度边界层”分布;随着火源位置的偏移,下游出现偏置距离起主导作用影响温度衰减的区域,衰减速度相较于中心火源逐渐降低;火源下游近壁面最高温度位置逐渐远离顶棚后趋于稳定。研究结果对于排烟方式的设计以及空间通风效果的提升有着重要意义。     

Smoldering combustion of dust layer on hot surface

The critical temperature as well as the critical flux for ignition of a dust layer of cornflour and a mixture of wheatflour and cornflour (80% wheatflour+20% cornflour) on a hot plate have been determined. The moulded sample was cylindrical in shape and of different heights and diameters. The particle size of dusts ranged between 63 μm to 150 μm. The temperature–time histories for self-heating without ignition and with ignition are offered, showing the critical boundaries between them. Also the times to ignition for each dust, showing the effect of sample size on their values, are determined. Certain experimental correlations which relate to times to ignition, as well as the critical temperature for ignition and thermal and geometrical dimensions of sample are presented.     

油层注水过程中水质不合要求的危害及保护措施

分析了油田在二次采油注水过程中,对水质的要求,讨论了水质不合格带来的危害并提出了保护措施.     

不同好氧预处理方式对餐厨垃圾产甲烷的影响

为了研究不同好氧预处理方式对餐厨垃圾厌氧消化产甲烷的影响,通过建立3个模拟厌氧生物反应器,研究了传统厌氧生物反应器C1、上层好氧预处理-厌氧生物反应器C2和底部好氧预处理-厌氧生物反应器C3 3种不同操作条件下的产甲烷过程.结果表明,挥发性有机酸的累积使C1始终处于产甲烷滞后阶段;而C2、C3的好氧预处理通过加快易水解酸化组分和过量挥发性有机酸的好氧降解,有效缓解了酸性抑制,产甲烷滞后时间明显缩短至10 d内.第32天C2停止上层曝气后,在27 d内甲烷浓度达到了50％以上,同时,产甲烷速率迅速上升,并在第81天可达到峰值773 mL/(kg·d).C3在第11天停止底部曝气后,虽然经过22 d的时间甲烷浓度即上升至50％,但之后产甲烷速率经历回落阶段后再次逐渐上升,在实验结束时仅达到517 mL/(kg·d).上层曝气的好氧预处理方式所需曝气时间相对较长,但其产甲烷启动快,与底部曝气相比,其后期的甲烷化过程更稳定并可达到较高的产甲烷速率.     

武汉市一次污染过程的局地流场和边界层结构的数值模拟

利用2013年11月武汉市逐日空气质量资料、地面气象观测资料、NCEP/NCAR再分析资料和L波段雷达探空资料，通过WRF模式模拟空气污染生消过程中的局地气象条件变化，探讨特殊地形条件下边界层结构变化和局地环流在污染物生消过程中的作用和影响。结果表明：（1）武汉地区当背景环流场强的时候，由地形引起的局地流场对污染物扩散的影响就弱，反之当背景环流场弱的时候, 地形对流场影响明显:夜间为山风，白天为谷风。夜间山风与偏西北气流及偏东气流在武汉及周边地区辐合，形成气流汇聚带，在武汉地区形成一个反复污染带,即由地形引起的局地流场对污染物扩散的贡献就大；（2）武汉地区发生空气污染时，地面湿度较高，边界层呈上干下湿状态，其特征为暖而干且有偏东小风，这导致污染物不断堆积和重污染过程的形成。     

气凝胶消防服隔热层研制的可行性分析

为了减少火焰环境对消防员的伤害,基于消防服隔热层对消防员生命安全保障的重要性,运用对比描述的方法对现有隔热层进行了分析比较,探究了其优缺点和性能,提出了轻质且具有优异隔热性能是隔热层的发展趋势,通过对气凝胶性能的理论分析和服用性能分析,研究了利用气凝胶材料研制消防服的隔热层,结果表明气凝胶在服装领域应用已经比较广泛,在消防服领域中也已有初步应用,但用气凝胶研制消防服隔热层仍存在着一定的挑战。     

Ignition temperatures of dust layers and bulk storages in hot environments

In many industrial installations, particulate solids (cereals, agri-food products, coal, plants, etc.) are stored or processed. Self-heating of these products, which can lead to fires and explosions, can occur in a variety of situations. Examples include large storage at room temperature, formation of a layer on a hot surface, layer deposited on a surface – insulating or conductive – in a hot environment or even storage of product exposed to heating on one side.The main parameters that determine the occurrence of self-heating are the size of the container, the temperature, the residence time and the characteristics of the product. Depending on the type of situation encountered and these implementation conditions, the analysis of self-heating risks must be based on specific models and/or parameters.This paper presents the different variants and combinations of the theoretical model from the theory of thermal runaway to represent self-heating, taking into account in particular the symmetry or asymmetry of heating, reagent consumption and boundary conditions. It also discusses their adaptation to the previous identified industrial situations.Nine products were chosen to be representative of those used in the different considered industrial situations. They were subjected to self-heating basket tests in isothermal ovens in order to determine the parameters for applying the described theoretical models. These results were compared with the results of self-heating tests in layers of different thicknesses in a hot environment, on an insulating or conductive plate, using a specially developed test protocol, as well as with the results of standardized tests of minimum ignition temperature in 5 mm layers.This led to the proposal of the most appropriate theoretical model to represent the self-heating phenomenon for each of the four identified industrial situations.This analysis can promote better design of industrial equipment and production conditions (temperatures, volumes or product flows …) in order to prevent fires and explosions.     

The performance of RAMS in representing the convective boundary layer structure in a very steep valley

Data from a comprehensive field study in the Riviera Valley of Southern Switzerland are used to investigate convective boundary layer structure in a steep valley and to evaluate wind and temperature fields, convective boundary layer height, and surface sensible heat fluxes as predicted by the mesoscale model RAMS. Current parameterizations of surface and boundary layer processes in RAMS, as well as in other mesoscale models, are based on scaling laws strictly valid only for flat topography and uniform land cover. Model evaluation is required to investigate whether this limits the applicability of RAMS in steep, inhomogeneous terrain. One clear-sky day with light synoptic winds is selected from the field study. Observed temperature structure across and along the valley is nearly homogeneous while wind structure is complex with a wind speed maximum on one side of the valley. Upvalley flows are not purely thermally driven and mechanical effects near the valley entrance also affect the wind structure. RAMS captured many of the observed boundary layer characteristics within the steep valley. The wind field, temperature structure, and convective boundary layer height in the valley are qualitatively simulated by RAMS, but the horizontal temperature structure across and along the valley is less homogeneous in the model than in the observations. The model reproduced the observed net radiation, except around sunset and sunrise when RAMS does not take into account the shadows cast by the surrounding topography. The observed sensible heat fluxes fall within the range of simulated values at grid points surrounding the measurement sites. Some of the scatter between observed and simulated turbulent sensible heat fluxes are due to sub-grid scale effects related to local topography.     

Structure of turbulent plumes from a momentumless source in a smooth bed

The spatial development of a passive scalar plume is studied within the inhomogeneous turbulence of a boundary layer flow in a recirculating laboratory flume with a smooth bed. The source of the scalar is located flush with the bed, and the low-momentum source design is intended to simulate a diffusive-type scalar release. A weakly diffusive fluorescent dye is used as the scalar. Planar laser-induced fluorescence (PLIF) techniques were used to record the structure of the plume at a spatial resolution of 150 μm. The measured structure of the mean concentration field is compared to an analytical solution for shear-free, homogeneous turbulence. The laboratory plume exhibits spatial development in the mean concentration field that deviates from the self-similar behavior predicted by the analytical solution; this deviation is due to the mean shear and inhomogeneity of the turbulence. In particular, the influence of the viscous sublayer on the plume development is seen to be significant. Nonetheless, the analytical solution replicates some of the features seen in the laboratory plume, and the solution suggests methods of reducing the laboratory data even for cases where the results deviate from the analysis. We also examine the spatial development of the root-mean-square (rms) fluctuating concentration field, and use scalar probability density functions to examine the relationship between the mean and fluctuating concentrations.     

屋顶绿化生态系统箱的研制

调查发现广州市屋顶自然生长的维管植物有49科109属128种,植物种类较多的科为菊科、禾本科、桑科、景天科、茜草科和鸭跖草科;屋顶自然生长的植物种类数量与环境受污染程度成反比,而与周围植物的多少成正比;屋顶自然生长的植物由于长期适应屋顶的极端环境,形成了的一些独特的生态生物学特征。基于上述结果配置相应的植物组合,设计适于屋顶绿化的生态系统箱、配制相应土壤并进行技术集成,观测其生长和隔热效应。同时进行空白对照、黑网荫蓬对照、生态隔热层对照、普通土壤种植区对比试验,发现生态隔热层和生态系统箱具有成本低、易维持、隔热好、景观美的效果。